Query Commands - JDS Uniphase TB9 Series User Manual

WVL Wavelength Control
Sets the wavelength of the TB9 filter; the default unit is in meters (M):
•
M = meters
•
MM = millimeters
•
UM = micrometers
•
NM = nanometers
SRE i SQR Mask
Writes a decimal number to the SRQ mask register (see the Status Reporting and Service
Request Control section). Setting a bit to 1 generates an SRQ interrupt when the
corresponding bit in the status register changes from 0 to 1.
CSB Clear Status Byte
Resets the status byte.
CLR Clear Device
Clears the SRQ mask register and the status register.

Query Commands

XDR? i Driver
Returns the state of an external relay driver (i):
•
0 = relay driver off
•
1 = relay driver on
WVL? Wavelength
Returns the wavelength setting:
•
WVL? returns the current wavelength setting
•
WVL? MIN returns the minimum wavelength compensation range
•
WVL? MAX returns the maximum wavelength compensation range
STB? Status Register
Returns a three-digit integer and automatically clears the status register if the SRQ bit is set.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Operating and Maintenance Instructions – 23