Operating And Maintenance Instructions; Front Panel - JDS Uniphase TB9 Series User Manual

Operating and Maintenance Instructions

Front Panel

The front of the filter is shown in Figure 5 and described in Table 4 and Table 5. TB9 grating
filters with a built-in splitter or switch have three fiberoptic connectors.
I
REM
LOCK
ADDR
SRQ
Table 4: Operating Keys
Key
I O Power on (I) /off (O) switch.
/
5V Controls the on/off state of the driver.
LCL Returns the unit to Local mode from Remote mode, and sets the GPIB address.
▲ / ▼
Scroll up ( ▲ ) o r d o w n ( ▼ ) t h r o u g h o p e r a t i o n s e t t i n g s , s u c h a s w a v e l e n g t h a n d G P I B
address. Each pair controls a digit in the corresponding position displayed on the
LCD.
Table 5: Status LEDs
LED
REM Indicates that the unit is in Remote mode. All the front-panel keys except LCL are
locked out.
LOCK Indicates that the unit is in Local Lockout mode. The function of the LCL key is
disabled, and all front-panel keys are locked out.
ADDR Indicates that the GPIB interface is in talk or listen state.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
TB9 OPTICAL GRATING FILTER
Figure 5: Front of Filter
Description
Description
5V
LCL
Operating and Maintenance Instructions – 16