Advertisement
AUTO
Time slot
consulted
st
1
time
slot
Lo mode
for 1 hour
Hi mode
for 1 hour
Time
Measured
temperature
Holiday
mode
Switches current mode,
e.g. Hi to Lo,
or vice versa
8
© Baxi Heating UK Ltd 2009
PROG
Confirm and go to
program change
the next day
Manual temperature mode
(from 30 minutes to 72 hours)
Day
Program
profile
Go to the next
Fig. 12
Current setting
(e.g. Hi)
Day (e.g. Tuesday)
Burner On
indicator
Fig. 13
5.0 Setting the Transmitter
5.3
Programming (Fig. 12)
1.The default programme is 'Hi' mode. set
for operation from 06:00 A.M. to 11:00
P.M. each day of the week.
2.To change the programme turn the
Selector Knob to the
PROG
3.The first 'time slot' will flash off & on.
4. Choose
or
for each hour, or press
to go to next change in programme.
Press
to select Lo mode for the hour or
for Hi mode.
Once done press 'OK' for next day, or:-
Quick Programming.
To apply the same programme to the
following day press and hold 'OK' for 3
seconds until the programme for the
following day is displayed.
5.Turn the knob to exit the setting mode.
5.4
Automatic Mode (Fig. 13)
1.Turn the Selector Knob to the
position.
2.When starting, the temperature
measured by the Transmitter is displayed
with the
symbol above the '°C'. Press ' '
for 3 seconds to display the set-point
temperature.
3. It is not necessary to operate the set
programme. If required one of the
'continuous' modes can be selected.
Turn the Selector Knob to:-
for continuous Lo
for continuous Hi
for continuous Frost Protection
position.
AUTO
Hide quick links:
Advertisement
