Introduction - Baxi 720030501 Installation & Operating Instructions Manual

AUTO
PROG
Fig. 1
Receiver Unit
© Baxi Heating UK Ltd 2009
Room Thermostat
Transmitter
Fig. 2

1.0 Introduction

1.1 Introduction
1.The kit consists of a Programmable
Room Thermostat Transmitter (Fig. 1) and
a Receiver Unit (Fig. 2) operated by radio
frequency, various fixings, 3 x AAA
batteries and a warning label.
2.The Transmitter constantly monitors the
temperature of the room in which it is
installed. It can be operated in three
temperature modes,'Lo','Hi' and 'Frost
Protection' or left in 'Automatic' to
operate as programmed.
3.The Transmitter must be located as
described in the next section.
4.The Receiver can be fitted anywhere in
the property relative to the appliance as it
is wired directly to the appliance switched
live, providing good radio frequency
communication will be maintained.
3