An Introduction To Digi-Line - Electrorad DigiLine Series Manual

An Introduction to Digi-Line

The Digi-Line electric radiator range has been designed and is manufactured in Britain, to give electricians the same
choice of radiator type and selection of sizes as plumbers have always been used to. The radiators are filled with a
thermal fluid to transfer heat to the whole of the surface area without the need for any pump or moving parts. The
fluid is heated by 100% efficiency electric elements which are controlled by the most advanced thermostat
electronics available. The radiator body is constructed in steel and powder coated to ensure a high quality, extremely
long lasting and robust finish. The range is available in 500mm & 300mm heights and power ratings from 500 watts
to 2000 watts. Single panel and double panel radiators are available and both have convection fins to ensure the
perfect balance of radiant and convected heat. Only the very best components and materials have been used in the
new Digi-Line range. There are some more very special, unique and energy saving features built in to the new
electronics. All features do not have to be used but can be activated if required. 1. Energy saving open window
feature – this senses when a window has been opened and stops the radiator heating until the window is closed. 2.
Surface temperature control – The surface temperature can be operated at the full 90 deg C or reduced to a
maximum of 75 deg C or a maximum of 60 deg C. ( Surface temperature reduction will reduce the heating power ) 3.
Double panel radiator smart control – If the room temperature is within 1 deg C of the set point, the front panel only
will operate. If the room temperature is more than 1 deg C from the set point, the back panel will also operate to act
as a boost and re-heat the room faster.
With the Touch E3 it is no longer necessary to go to a radiator to make control changes, any radiator in any room of
the property can be controlled individually from this central control. Because it is communicating with each radiator
it can utilise the thermostat sensors on each of the radiators to produce exactly the temperature you want in each
room separately. This means you also have absolute control of the energy use. All features can also be controlled
from the Clevertouch app from anywhere in the world
2