Quality/ Frame Rate; Metering - Samsung DIGIMAX A503 User Manual

Quality/ Frame rate

■You can select the compression ratio appropriate for your application of the
captured images. The higher the compression ratio, the lower the picture
quality.
Mode STILL IMAGE mode
Icon
Sub menu S.FINE
File Format jpeg
QUALITY
S. FINE
FINE
NORMAL
[ STILL IMAGE mode ]
INFORMATION
●This file format complies with the DCF(Design rule for Camera File system).
●JPEG (Joint Photographic Experts Group) :
JPEG is the image compression standard developed by the Joint
Photographic Experts Group. This type of compression is most commonly
used for compressing photos and graphics because it can compress the
files efficiently without damaging the data.
MOVIE CLIP mode
FINE NORMAL 24FPS
jpeg jpeg avi
FRAME RATE
24 FPS
15 FPS
[ MOVIE CLIP mode ]

Metering

■If you cannot obtain suitable exposure conditions, you can change the metering
method to take brighter pictures.
[MULTI] ( ) : Exposure will be calculated
15FPS
avi
[SPOT] ( ) : Only the rectangular area in the
※ If the subject is not the centre of the focus area, do not use the spot metering
as this may result in an exposure error. In this circumstance, It is better to use
exposure compensation.
based on an average of the
available light in the image area.
However, the calculation will be
biased towards the centre of the
image area. This is suitable for
general use.
centre of the LCD monitor will be metered for light. Use this
setting when you want the subject in the centre to be correctly
exposed, regardless of the back lighting.
METERING
MULTI
SPOT
[PROGRAM mode]
《31》