Continuous Shooting; Sharpness - Samsung DIGIMAX A503 User Manual

Continuous Shooting

■Select the number of pictures in continuous shooting.
- [SINGLE] : Take one picture only
- [CONTINUOUS] : Images will be taken
continuously until the shutter
button is released. The shooting
capacity depends on the
memory.
- [AEB] : Take three pictures in a series in
different exposures: standard
exposure (0.0EV), short exposure (-0.5EV),and over
exposure (+0.5EV). Use the mode if it is hard to decide
exposure of the object.
※ High resolution and picture quality increases file saving time, which increases
stand-by time.
※ If the [CONTINUOUS] sub menu is selected, the flash will be off automatically.
※ If less than 3 pictures are available in the memory, the AEB setting will not
work.
※ It is best to use a tripod for the AEB shooting as the time to save each image
file is longer and the blurring caused by camera shake may occur.
《32》
■You can adjust the sharpness of the picture you want
to take. You cannot check the sharpness effect on
the LCD monitor before you take a picture, because
SHOOTING
this function is applied only when the captured image
SINGLE
is stored on the memory.
CONTINUOUS
AEB
[PROGRAM mode]
Sub menu
SOFT
NORMAL
VIVID

Sharpness

Icon
The edges of the image are softened.
This effect is suitable for editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized. The edges
will appear sharp, but noise may occur in the recorded
image.
SHARPNESS
SOFT
NORMAL
VIVID
[PROGRAM mode]
Description