Connecting To A Power Source; Using The Batteries - Samsung DIGIMAX A400 User Manual

Connecting to a Power Source

Using the batteries

[ Inserting the AA type battery ]
There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
14
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity (+ / -).
1. Open the battery chamber cover by pushing in the direction of the
arrow.
[ Inserting the CR-V3 type battery ]
3. To close the battery chamber cover, push it until it clicks.
The batteries are fully
charged
2. Insert the batteries taking note of
the polarity (+ / -).
Prepare new batteries
There is no battery capacity.
Replace with new batteries.