Special Functions - LG DLE3400 Series Owner's Manual

Special Functions

Some cycle option buttons also activate secondary
functions. These special functions are marked with
an asterisk (*). Press and hold the option button
marked with the special function to activate it.
Control Lock
Use this option to prevent unwanted use of the
dryer or to keep cycle settings from being changed
while the dryer is operating.
Activating the Control Lock Function
Press and hold the Wrinkle Care button for 3
seconds.
The Control Lock icon will be shown in the display,
and all controls will be disabled except the Power
button.
Deactivating the Control Lock Function
Press and hold the Wrinkle Care button for 3
seconds.
Once set, Control Lock remains active until it is
manually deactivated. Control Lock must be turned
off to run another cycle.
Damp Dry Signal
When this option is selected, the dryer signals
when the load is approximately 80% dry. This
allows you to remove faster-drying lightweight
items or items that you would like to iron or hang
while they are still slightly damp.
SIGNAL
Press and hold the Dry Level button for 3 seconds
to adjust the volume of the signal. Press and hold
the button repeatedly to adjust the volume of the
melody. When no signal is heard, the signal is off.
The volume settings are ON – OFF. The signal
volume can be adjusted at any time as long as the
dryer is turned ON.
Default On/Off
This option allows the Energy Saver settings to
be changed. To run a Normal cycle without the
Energy Saver option, press and hold the Energy
Saver button for three seconds. ON or OFF
appears in the display.
OPERATION 33