Selecting The Installation Location - Samsung AVXWVH022EE Installation Manual

Wall-mounted type series
Hide thumbs Also See for AVXWVH022EE:
Table of Contents

Advertisement

Selecting the Installation Location

Indoor Unit
 Select a convenient location that permits the air to reach every corner of the
area to be cooled.
 Pre-plan for easy and short routing of the refrigerant tubing and wiring to
the outdoor unit.
 There should be no flammable gas, alkaline, substances present in the air.
 Avoid location where obstacles preventing good air circulation are present.
 Noise prevention should be considered in determining the unit's location.
 The structure, where the unit is to be installed should be strong enough to
support the weight of the unit.
 Rigid wall without vibration.
 Where it is not exposed to direct sunshine.
 Where the air filter can be removed and cleaned easily.
Space Requirements for Indoor Unit
Observe the clearances and maximum lengths as seen in the picture below when
installing the air conditioner.
Wrap the refrigerant pipes and the drain
hose with the absorbent pad and vinyl
tape. Refer to page 15 for further details.
The appearance of the unit may be different from the diagram depending on the model.
AVXWV@@_IM_E_29819-1_4.14.09.indd 7
300 mm or more
125 mm
or more
You can select the direction
of draining. (left or right)
125 mm
or more
7
E-
2009-4-14 10:15:30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents