Key Function; Test Run - Samsung AVXWVH022EE Installation Manual

EEV Kit Installation (Continued)
12
E-
AVXWV@@_IM_E_29819-1_4.14.09.indd 12
Function of Display
T he numbers which are displayed on left are the status of indoor unit checking

status through communication with same outdoor unit.
(If it indicates 1, 3 and 7, that means the ADDRESS of indoor unit is set to 1, 3 and 7.)
T he numbers which are displayed on right indicate the ADDRESS of SW01/SW02,

SW03/SW04 and SW05/SW06 in sequential. (If it indicates 0, 1 and 2, that means the
SW01/SW02 is set to 0, the SW03/SW04 is set to 1, and the SW05/SW06 is set to 2.)
I f the communication error occurs in EEV Kit, the ErC0 message will be shown on

the display alternatively.

KEY function

I f you press a KEY on the PCB, the display will show you a step of appropriate

EEV Kit.
KEY No.
K1 Step of EEV Kit A
K2 Step of EEV Kit B
K3 Step of EEV Kit C
K4

Test run

E ach indoor unit runs separately to check pipe connection and address setting.

CAUTION
If all units run at the same time, pipe cross connection and address
mismatching cannot be found.
Meaning Example
19 (19 x 10 = 190 STEP)
- -
2009-4-14 10:15:37