Advertisement
4.6.
data recall
4.6.1.
Press the meAs button once to turn the unit on. Press the mem button once to display the current memory location in the bottom right hand
corner of the display.
4.6.2.
if no data has been recorded for this location, another press of the button will advance the display to the next memory location.
4.6.3.
When a memory location that contains data is selected the reading will show in the centre of the display and the appropriate unit of
measurement will be shown at the top of the display.
4.6.4.
if maximum, minimum and average figures have been recorded for a variable unit of measurement such as rPm, the first measurement
will be displayed with the word mAX appearing at the bottom of the display. Press the mem button again to see the min measurement
and press the button again to see the AVG measurement. see figs. 5, 6 & 7. the next press of the mem button will advance the display to
the next memory location.
4.6.5.
if no buttons are pressed for 15 seconds the unit will automatically switch off.
fig.5
Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500
environment protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Weee regulationS
dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. contact your local solid
waste authority for recycling information.
BatterY removal - reFer to Section 4
under the Waste Batteries and Accumulators regulations 2009, Jack sealey ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
sealey ltd Batteries Producer registration number (BPrn) is BPrn00705.
note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey group, kempson Way, Suffolk Business park, Bury St edmunds, Suffolk. ip32 7ar
01284 757500
© Jack sealey limited
fig.7
fig.6
01284 703534
Original Language Version
sales@sealey.co.uk
www.sealey.co.uk
tA050
issue 5 (H,3,4,f) 02/03/18
Advertisement
