Connecting The Soundbar To The Mains; Connecting A Subwoofer To The Power Supply; Connecting The Subwoofer - Medion Life P61220 Instruction Manual

8. Connecting the soundbar to the mains

 Plug the power cable into the AC~ power cable socket.
 Check that all the devices you want to connect are connected.
 Plug the power cable into a 220–240 V ~ 50/60 Hz socket.
The on/off LED operating display lights up red.
9. Connecting a subwoofer to the power
supply
 Plug the power cable into the AC~ power cable socket.
 Check that all the devices you want to connect are connected.
 Plug the power cable into a 220–240 V ~ 50/60 Hz socket.

9.1. Connecting the subwoofer

The subwoofer automatically connects to the soundbar as soon as both devices are
switched on.
However, if the subwoofer does not connect with the soundbar automatically, pro-
ceed as follows:
 Press and hold down the PAIR button on the subwoofer for approximately 3 sec-
onds.
The subwoofer switches to pairing mode and the PAIR LED starts flashing rapid-
ly.
 Switch the soundbar on either by pressing its
trol.
The PAIR LED stops flashing as soon as the connection is complete.
However, if the PAIR LED continues flashing, this mean the connection could not
be established. In this situation, unplug the subwoofer for approximately 3 minutes
and then repeat steps 1 and 2.
174
UK
OR
EU
button or with the remote con-