Starting Up The Soundbar; Switching On The Soundbar/Switching To Standby Mode; Connecting The Soundbar And Subwoofer - Medion LIFE P61450 User Manual

Push the dowels into the drilled holes.
Tighten the screws on the wall brack-
et, as shown. Make sure that the nar-
rower part of the eyelet for the sound-
bar points downwards (see Fig.).
Use lens head screws (e.g. . mm x
 mm).
Loosen both outer screws on the
soundbar until it can be hung on the
wall brackets.
Place the soundbar onto the wall brackets and then gently push the soundbar
downwards until the screws engage in the wall brackets.
. Starting up the soundbar
.. Connecting the soundbar and subwoofer to the
power supply
Connect the supplied mains cable to the AC~ connection socket on the sound-
bar and plug the other end into an easily accessible power socket.
The Standby LED lights up.
Connect the second supplied mains cable to the AC~ connection socket on the
subwoofer and plug the other end into an easily accessible power socket.
The Pairing LED on the back of the subwoofer lights up.
.. Switching on the soundbar/switching to standby
mode
Switch on the soundbar by pressing the
soundbar.
During operation, press and hold the
mote control to switch the soundbar into standby mode.
.. Connecting the soundbar and subwoofer
The soundbar and subwoofer connect automatically the first time they are used.
Once the connection is successful, the Pairing LED on the back of the subwoofer
lights up continuously.

button on the remote control or the
button on the soundbar or on the re-