Table of Contents
Advertisement
Push the battery holder complete with battery back into the remote
control as far as it will go.
CAUTION
Risk of explosion if batteries are replaced incorrectly. Replace batteries
only with the same or equivalent type.
Operation
Connecting audio equipment
• Please read the information in the section "Safety and maintenance" on
page 5.
• Also comply with the operating instructions of the device to which you
want to connect the soundbar.
• Switch off all devices before connecting them to each other.
You can connect a number of different audio devices to this product, e.g. an
MP3 player, a CD player, the receiver of your stereo system, a computer or
even your television.
Using the AUX IN connection
You will need an audio cable with cinch plugs. The product is supplied with a
1 cinch audio connection cable 2 x cinch -> 3.5 mm jack.
Set the audio device to a medium volume. Then switch it off.
Plug the 3.5 mm jack into the audio input socket
loudspeaker panel.
Plug the red and the white cinch connectors into the sockets of the
corresponding colours on the output device.
NOTE
Pieces of equipment like stereo receivers or television sets usually
have one red and one white audio output socket. These are usually
marked OUT, AUDIO OUT, LINE OUT or similar.
Optical connections
Digital amplifiers can be connected at the port marked "
need an optical digital cable (fibre-optic cable - not supplied with the product
- available from specialist retailers).
Set the audio device to a medium volume. Then switch it off.
Plug the connector into the
Plug the connector into the corresponding digital input socket on your
digital receiver.
After Sales Support
Telephone:
14 of 20
Internet:
Q R V K E C N "
1300 884 987
www.medion.com.au
C W Z " K P "
Q R V K E C N $ "
socket on the loudspeaker.
on the
. You will
Hide quick links:
Advertisement
Table of Contents
