Medion Life P61220 Instruction Manual page 172

WARNING!
Risk of injury due to electric shock!
There is a risk of electric shock due to live cables and
wiring.
 Install the device in a suitable location, and take care
not to hit any hidden electrical cables or pipework
when drilling.
 In each case, drill two holes into the wall,
parallel to each other (diameter 6 mm,
depending on the wall construction).
The holes must be 764 mm apart.
 Push the dowels into the drilled holes.
Tighten the screws on the wall brack-
et, as shown. Ensure that the eye for the
soundbar has the narrow part pointing
downward, see Fig. a.
Use raised countersunk-head screws for
this (e.g. 3.5 mm x 45 mm)
 Loosen both outer screws on the sound-
bar until it can be mounted on the wall
bracket.
 Place the soundbar onto the wall brackets and then gently push the soundbar
downwards until the screws engage in the wall brackets.
764mm
764mm
SOUR CE
VOL
VOL
2 m m
DE
FR
ES
IT
NL
EN
173