Hyundai KONA Electric 2020 Owner's Manual page 173

Convenient features of your vehicle
NVS ® is a registered trademark and
Z-Nav™ is a trademark of the Gentex
Corporation, Zeeland,
HomeLink ® is a registered trademark
owned by Johnson
Incorporated, Milwaukee, Wisconsin.
FCC ID: NZLUAHL5A
IC: 4112A-UAHL5A
i
Information
This device complies with Industry
Canada RSS-210 standard.
Operation is subject to the following
three conditions:
1. This device may not cause harmful
interference.
2. This device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation.
3. The transceiver has been tested and
complies with FCC and Industry
Canada rules. Changes or modifi-
cations not expressly approved by
the party responsible for compli-
ance could void the user's authority
to operate the device.
3-26
Two Way Communication Programing
1. Complete
Michigan.
"Programming" first.
2. Before the first 10 times HomeLink
Controls,
button is pressed after the pro-
gramming, the following steps
MUST occur to program two way
communication. (only for some
older garage doors)
3. Press and release the programed
HomeLink button to activate the
garage door.
4. Once the garage door is stopped,
press and release the "Learn" or
"Smart" button on the Garage door
opener within 1 minute from the
time of pressing the programed
HomeLink button on mirror.
the HomeLink
5. If both indicator (4) and (6) are
flashing rapidly for about 5 sec-
onds, the two way synchronization
is completed.
i
Information
Some newer garage door openers pro-
vide two-way communication syn-
chronizing when programming the
OOSEV048099C
original transmitter (OT).
OOS047411C