Electric Connection - Ruby SDB-SS 2010 Instructions Manual

3. For the model SDB-SS 2010, assemble the heater on the towel rack by fitting the slots
of the heater to the pins of the towel rack. Then screw the upper screw as mentioned in
point 3 to assemble the heater and the towel rack together. (see fig 3)

5. Electric connection

The electric installation wich it is be connected must be conform with the
requirements of the norm NF C 15-100. In a bathroom, the electric connection of the
apparat must be protected by an individual fuse whose residual current amperage should
not exceed 30 Am.
It is not necessary to dismount the apparatus to carry out its electric connection. The
apparatus should not be installed under a Socket for plug at fixed station.
Always want with the good state of your electric installation and with wire of connection.
If the electric cable is damaged, made call with the manufacturer, his service after sale or
a person of similar qualification to replace it in order to avoid a danger.
Before all intervention, do not forget to to cut off the electric supply of the circuit.
14