Selecting Good Sleep Mode - Samsung MH020FNEA User Manual

Selecting Good Sleep Mode

18
E-
FJM_Neo_FORTE_Inv_28925A_IB_E.indd 18
Good Sleep mode helps users to fall asleep well after going to bed whether
being too hot to sleep or being awakened by coldness. The Good Sleep mode can
be selected only when the air conditioner is switched on in cool/heat mode.
1
Press the (On/Off) button.
Result:
 The operation indicator on the indoor unit lights up.
 The air conditioner starts up in the mode you selected last.
 The indoor unit beeps.
2
Press the button to select
Result:  The indoor unit beeps each time you press the
 The air conditioner runs in cool or heat mode.
3
Press the button.
- The remote control display shows you that this mode automatically stops
after 8-hour operation.
- In the case of adjusting time
 Press the button to adjust desired operation time from 30 minutes
to 12 hours.
Good Sleep mode will automatically stop after the set time.
 Press the button.
Result: In the case of adjusting the extra time for Good Sleep mode,you
should press the
the button within 10 seconds.Good Sleep mode will
automatically stop in 8-hour operation.
4
Press the button to adjust the temperature until the desired
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result:  E ach time you press the
- The temperature adjusts by 1°C
- The indoor unit beeps
or mode.
button within 10 seconds.If you do not press
button;
button.
2007-12-3 19:10:16