Selecting Auto Mode - Samsung MH020FNEA User Manual

Selecting Auto Mode

You can select Auto mode if you want to cool or heat your room automatically.
You can adjust the temperature in this mode.
1
Press the (On/Off) button.
Result:  The operation indicator on the indoor unit lights up.
 The air conditioner starts up in the mode you selected last.
 The indoor unit beeps.
2
Press the button on the remote control until
Result:  The indoor unit beeps each time you press the
 The air conditioner runs in Auto mode.
 Auto mode cools or heats the room depending on the set
temperature.
Note You can change modes at any time.
3
Press the button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result:  Each time you press the
- The temperature adjusts by 1°C
- The indoor unit beeps
4 Press the button to select the fan speed until the required setting is
displayed.
Automatic (rotated :
Low
Medium
High
Result: Each time you press the
5 To control the airflow direction, refer to page 21.
FJM_Neo_FORTE_Inv_28925A_IB_E.indd 13
is displayed.
button.
button:
)
 
button, the indoor unit beeps.
13
E-
2007-12-3 19:10:01