Table of Contents
Advertisement
ENGLISH (Original instructions)
SPECIFICATIONS
With battery BL1815
Fastening
torque
With battery BL1815N / BL1820
BL1830 / BL1840 / BL1850
No load speed *
Standard battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
1
• *
No load speed is adjustable with exclusive application.
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In
observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
Noise
The
typical
A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model
Hard joint
Hard joint
Square drive
1
Dimensions
Net weight
Rated voltage
of
the
and
returned
noise
level
determined
) : 72 dB (A)
pA
Soft joint
Soft joint
BL1815, BL1815N, BL1820
583 mm x 75 mm x 116 mm
ENE033-1
Vibration
END004-6
The
vibration
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
European
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
to
an
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENG905-1
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
DFL650F
25 - 58 N • m
25 - 50 N • m
25 - 65 N • m
9.5 mm or 12.7 mm
-1
80 - 200 min
BL1830, BL1840, BL1850
600 mm x 75 mm x 116 mm
2.5 kg
D.C. 18 V
Wear ear protection
total
value
(tri-axial
) : 2.5 m/s
h
2
2.7 kg
ENG900-1
vector
sum)
2
or less
ENG901-1
Advertisement
Table of Contents
