LEXMAN UP 40VBA2-50.1 Instruction Manual page 244

4. OPERATION
HOW TO REMOVE THE BATTERY PACK FROM THE TOOL
Make the tool stop completely.
Press and hold the unlock button place on the tool.
Remove battery pack from the tool.
COLD WEATHER OPERATION
The lithium-ion battery pack can be used in temperatures down
to -20 °C. Put the battery pack on a tool and use the tool in a light
duty application. After about a minute, the pack will warm up and
begin operating normally.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may become hot.
A hot battery pack may be placed directly onto the charger port
but charging will not begin until the battery temperature cools to
within acceptable temperature range. When a hot battery pack is
placed on the charger, the charger may indicate the pack is not
ready to charge. Please refer to charger operator's manual.
When the battery pack cools the charger will automatically begin
charging.
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger port
but charging will not begin until the battery temperature warms
to within acceptable temperature range. When a cold battery pack
is placed on the charger, the charger may indicate the pack is not
ready to charge. Please refer to charger operator's manual.
When the battery pack warms to approximately room temperature
the charger will automatically begin charging.
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
243