Advertisement
For replacement parts visit
WENPRODUCTS.COM
Your new tool has been engineered and manufactured to WEN's highest standards for dependability, ease
of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If
you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.
DRILL PRESS
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
techsupport@wenproducts.com
WENPRODUCTS.COM
TABLE
bit.ly/wenvideo
(M-F 8AM-5PM CST)
Advertisement
Table of Contents
Related Manuals for Wen DPA2412
Summary of Contents for Wen DPA2412
- Page 1 IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.
- Page 2 T-Track Center to Center Distance: 13 in. Table and Fence Dimensions: 23-7/8 in. x 11-7/8 in. x 4 in. Overall Dimensions: 23-7/8 in. x 11-7/8 in. x 7-1/2 in. Weight: 10.5 lbs Compatible with WEN 4208, 4210, 4212, 4214, 4225 and 4227 Drill Presses...
- Page 3 GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, DO NOT use your item until the following steps have been read and understood. These safety rules cannot address every possible scenario you may en- counter, so please use common sense and caution when using the item.
- Page 4 DPA2412-003 Fence Stop Block DPA2412-010 Tapping Screw M8.5x12 DPA2412-004 Drill Press Table DPA2412-011 Full Thread Rod DPA2412-005 Stop Block Knob M6x1 DPA2412-012 Mounting Clamp DPA2412-006 Stop Block Bolt M6x1x40 DPA2412-013 Flat Washer 8mm DPA2412-007 T-Slot Bolt M8x1.25x90 DPA2412-014 Insert Block...
- Page 5 INSTALLATION 1. Unpack and assemble the drill press table according to the Exploded View and Parts List on page 4. Refer to the dimensions listed above to determine the space and arrangements needed for your drill press table. 2. There are four clamp positioning flanges on the bot- tom of the drill press table (Fig.
- Page 6 LIMITED TWO YEAR WARRANTY WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN con- sumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
- Page 7 THANKS FOR REMEMBERING...
Need help?
Do you have a question about the DPA2412 and is the answer not in the manual?
Questions and answers