All luminaires turn ON when the first occupancy sensor senses motion
●
All luminaires turn OFF when the last occupancy sensor times out unoccupied
●
All wallstations in the default area control all luminaires together.
●
All integrated sensors, Tile Mount and Ceiling sensors create an occupancy group
●
Relay with 0-10V
●
Connected luminaires dim to 75%
●
All wallstations in the default area control all luminaires together.
●
All luminaires turn ON when the first occupancy sensor senses motion
●
All luminaires turn OFF when the last occupancy sensor times out unoccupied
●
Relay turns ON/OFF based on occupancy
●
Receptacle
●
The controlled outlet will turn ON/OFF based on occupancy
●
Wallstation
●
All wallstations in the default area will control all luminaires in the default area based on out-of-the-box scene
●
definitions.
Ceiling Sensor
●
The LED on the sensor will flash when detecting occupancy
●
All integrated sensors, Tile Mount and ceiling sensors create an occupancy group
●
Connecting the Wireless Area Controller to the Building LAN
1.
Wired Connection - Building LAN connection
Connect the WAC to the building PoE switch or PoE injector into the normal network.
●
Physical connection to the building LAN and receiving an IP address will automatically disable the wireless connection
●
method
WAC's will automatically receive a DHCP IP address when connected to the building LAN
●
WAC device name will be: Eaton-xxxxxxxxxxxx on the building network
●
(where **** are all twelve characters of the unit MAC address found on the label at the bottom front of the WAC
●
plus 1)
Using the WAC internal web page,
●
Change the default name of the WAC
●
Statically assigning the IP address of the WAC
●
2.
Wireless Connection - Building Wireless connection
WAC device name will be: Eaton-xxxxxxxxxxxx
●
(where **** are all twelve characters of the unit MAC address found on the label at the bottom front of the WAC
●
plus 1)
Using the WAC internal web page,
●
Enter the building wireless login credentials.
●
Building wireless login credentials are secured in the WAC by secure web pages and encryption during
●
storage.
Change the default name of the WAC
●
Statically assigning the IP address of the WAC
●
WaveLinx Wireless Area Controller (WAC)
WaveLinx Installation instructions
9