Advertisement
Figure 2. Enterprise installation
BACnet/IP
Public (REST) API
Third Party system
(hardware provided
by others)
Building LAN
Touchscreen
Area or Room
(15 + 1 construction area)
347V and 20A
Dimming Relay
Wireless Controlled Lighting ready devices
(up to 150 per WAC)
Overview
The Wireless Area Controller (WAC) is the main component of the WaveLinx Connected Lighting system. WaveLinx eliminates
the cost and complexity of typical wireless control system commissioning while providing a wired, flexible, and reconfigurable
wireless topology for on the fly space adjustments. The WaveLinx system meets modern code and utility requirements,
delivers energy and cost savings, while enabling buildings to become smart buildings.
The WAC coordinates between the WaveLinx Mobile App and various WaveLinx devices to create communications
and a building ecosystem that provides out of the box functionality and leverages our patent pending automatic code
commissioning features. Using standards-based wireless mesh compliant topology the WAC communicates to various WCL
standards-based devices to provide area, lighting zone configuration, monitoring, and control.
The WAC provides centralized coordination of multiple areas for partial ON/partial OFF scheduling, demand response, lighting,
occupancy and daylight settings and scene control. A single WAC can be connected to the building LAN to coordinate up to
15 user-defined areas and 1 construction area, or multiple WAC's can exist on a building LAN to scale the system to hundreds
of areas all accessible for setup, configuration and control through the WaveLinx Mobile App.
WaveLinx system components
Wireless Area Controller (gateway)
●
WaveLinx Mobile App (commissioning and user personal control)
●
WaveLinx Wallstation - wired or battery (manual lighting and scene control)
●
WaveLinx Touchscreen
●
Wireless INstinct Sensor (fixture integrated occupancy sensor, ambient light sensor and control)
●
WaveLinx Relay Switchpacks with 0-10V
●
WaveLinx Receptacles (wall mounted power outlet)
●
WaveLinx Room Based Sensor (ceiling mounted PIR occupancy sensor)
●
Desktop/Laptop
with web browser
(hardware provided
by user)
BACnet Router
1
(hardware provided
by others)
PoE
Power
Wireless Area
Controller
Controlled
Room Based
Receptacle
Occupancy Sensor
WaveLinx Wireless Area Controller (WAC)
Trellix Core
WaveLinx Mobile App
used for system
setup and
personal control
Scene
WaveLinx-Integrated
Wallstation
Ambient
Area or Room
(15 + 1 construction area)
Area or Room
(15 + 1 construction area)
KEY
Wi-Fi Signal
IEEE 802.15.4
WaveLinx-Integrated
Note:
Trellix Core Pro shown in this illustration.
Outdoor
Trellix Core hardware can be either Pro,
Enterprise or Virtual.
1
BACnet Router only required if
Trellix Core and third party BACnet client
are on differenet subnets.
WaveLinx Installation instructions
3
Advertisement
