WaveLinx Wireless Area Controller (WAC)
Wireless Area Controller
4.75"
[121mm]
4.75"
[121mm]
Installation
The Wireless Area Controller (WAC) must be installed in accordance with all local, state, and national electrical codes and
requirements. Before mounting the WAC in its final location:
1.
Install Wavelinx wireless devices and verify out-of-the-box functionality
2.
Mount the Wireless Area Controller (WAC)
Ensure the WAC is roughly central to the devices with which it is communicating.
●
Review the "Where to Mount" section of this installation instruction.
●
The WAC can be mounted on a shelf, wall, DIN rail or ceiling using the included mounting bracket
●
Ensure the surface the WAC is mounted against is not made of concreate, metal or other material that would reduce the
●
wireless communication.
4
WaveLinx Installation instructions
4.75"
[121mm]
1.0"
[25mm]
• Mounting hole locations 1.5" (38mm)
• Use #6 screws (provided by others) for mounting