Advertisement
WaveLinx Wireless Area Controller (WAC)
SAVE THESE INSTRUCTIONS
This installation instruction is for the Wireless Area Controller (WAC-POE) which enables user control of the WaveLinx system and
devices via local control or through the WaveLinx Mobile application.
The purpose of this document is to provide sufficient detailed instructions for installation and basic troubleshooting.
This document covers installation of the following products.
WAC-POE Wireless Area Controller, POE powered
●
WAC-120 Wireless Area Controller, 120V (includes PoE injector for power)
●
Note: For WAC-120, customer require a power supply that should be order directly from Cooper Lighting Solutions.
Power Supply P/N: WPOE-120
WaveLinx System Architecture
Figure 1. Stand Alone WAC installation
120V Power
PoE Injector
Network
Switch
2
WaveLinx Installation instructions
Wireless Area
Controller
Area or Room
(15 + 1 construction area)
347V and 20A
Room Based
Dimming Relay
Occupancy Sensor
Wireless Controlled Lighting ready devices
(up to 150 per WAC)
WaveLinx Mobile App
used for system setup
and personal control
Controlled
Scene
WaveLinx-Integrated
Receptacle
Wallstation
KEY
Wi-Fi Signal
IEEE 802.15.4
WaveLinx-Integrated
Ambient
Outdoor
Advertisement
