Table of Contents
Advertisement
working condition. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre before use.
WARNING
When the throttle trigger is released and the engine is
running at idle speed, the cutting attachment or blade
must not move. If it does continue to move, there is risk
of severe injury to the operator. Do not use the product.
Bring it to an authorised service centre for professional
adjustment.
■ Do not touch the area around the silencer or engine of
the product, these parts get very hot during operation.
■ Do not modify the machine in any way
■ Do not force the hedge trimmer through heavy
shrubbery. This can cause the blades to bind and slow
down. If the blades slow down, reduce the pace.
■ Do not attempt to cut stems or twigs that are larger
than 11 mm thick, or those obviously too large to feed
into the cutting blade. Use a non-powered hand saw or
pruning saw to trim large stems.
■ Ensure to keep a running or hot engine and silencer
well away from combustible materials to reduce the
risk of fire.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and
the operator should pay special attention to avoid the
following:
■ Injury caused by contact with cutting means. Ensure
that the blade protectors are fitted when the product is
not in use. Keep hands and feet away from the blades
at all times.
■ Injury caused by vibration. Always use the right tool for
the job, use designated handles and restrict working
time and exposure. See the section "risk reduction" in
this manual.
■ Hearing injury caused by exposure to noise. Wear
hearing protection and limit exposure.
■ Eye injury due to flying debris. Wear eye protection
at all times.
■ Injury caused by falling objects. Wear head protection
if there is any risk of falling objects.
English (Original Instructions)
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness, and blanching of the fingers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these
symptoms. It is presently unknown what, if any, vibrations
or extent of exposure may contribute to the condition.
There are measures that can be taken by the operator to
possibly reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating
■ After each period of operation, exercise to increase
■ Ensure that the product is correctly located in a
■ Limit the amount of exposure per day. Take frequent
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor.
Injuries may be caused or aggravated by prolonged
use of the product. When using any tool for prolonged
periods, ensure you take regular breaks.
MAINTENANCE
Servicing requires extreme care and knowledge
and should be performed only be a qualified service
technician. For service we suggest you return the
product to your nearest authorised service centre for
repair. When servicing, use only identical replacement
parts.
4
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
blood circulation.
designated working position before starting.
work breaks.
WARNING
WARNING
Advertisement
Table of Contents
