Related Manuals for Ryobi AHF03
Summary of Contents for Ryobi AHF03
- Page 1 AHF03 HEDGE TRIMMER ATTACHMENT ORIGINAL INSTRUCTIONS Important! It is essential you read the instructions in this manual before assembing, operating, and maintaining the product. Subject to technical modification.
- Page 2 English (Original Instructions) SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. Symbols Explanation Precautions that involve your safety. To reduce the risk of injury, user must read and understand operator’s manual before using this product.
-
Page 3: Intended Use
This hedge trimmer attachment is approved for use with all objects being thrown into your eyes, which can result Ryobi/Homelite petrol-driven power head of 30cc or less. in severe eye injury. Before operating the product, It is intended to be used only by adults who have read and... -
Page 4: Operation
English (Original Instructions) ■ Familiarise yourself with your surroundings and be WARNING on the alert for possible hazards which you may not This product is extremely noisy in operation. You must notice because of the noise from the hedge trimmer. wear ear protection to reduce the risk of long term MAINTENANCE AND STORAGE hearing injury. -
Page 5: Residual Risks
English (Original Instructions) working condition. Any part that is damaged should be RISK REDUCTION properly repaired or replaced by an authorised service centre before use. It has been reported that vibrations from handheld tools may contribute to a condition called Raynaud’s Syndrome in certain individuals. -
Page 6: Replacing The Blades
English (Original Instructions) LUBRICATING THE BLADE WARNING See figure 5. Blades are sharp. When handling the blade assembly, ■ For easier operation and longer blade life, lubricate the wear non-slip, heavy-duty protective gloves. Do not hedge trimmer blade before and after each use. place your hand or fingers between blades or in any ■... -
Page 7: Packing List
English (Original Instructions) Short term storage (less than 1 month) ASSEMBLING THE POWER HEAD TO THE ATTACHMENT ■ Stop the engine, and allow it to cool before storing. See figure 2. ■ Cover the blade with the blade protector (scabbard). WARNING ■... -
Page 8: Operating The Hedge Trimmer
English (Original Instructions) ■ If blades do become jammed, stop the engine, allow OPERATION the blades to stop, remove the spark plug wire and remove the obstruction. WARNING ■ If desired, you can use a string to help cut your hedge level. - Page 9 English (Original Instructions) ATTACHING THE STORAGE HANGER There are two ways to hang your attachment for storage. (See figure 6.) ■ To use the storage hanger, push in the button and place the storage hanger over the end of the attachment shaft.
-
Page 10: Product Specifications
English (Original Instructions) PRODUCT SPECIFICATIONS Hedge trimmer attachment Model AHF03 Blade length 480 mm Cutting length 450 mm Max cutting capacity 11 mm Weight (without power head) 2.0 kg Vibration level (in accordance with Annex C of EN ISO 10517:2009+A1:2013) - Page 11 4. For servicing, the product must be sent or presented to a RYOBI authorised service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organisation.
-
Page 12: Declaration Of Conformity
Guaranteed sound power level: 110 dB(A) Conformity assessment method to Annex V Directive 2000/14/EC amended by 2005/88/EC. The hedge trimmer attachment (AHF03) is intended to assemble with all Ryobi / Homelite petrol driven power head of 30 cc or less. - Page 16 Techtronic Industries GmbH Max-Eyth-Straße 10, 71364 Winnenden, Germany 961478055-03...
Need help?
Do you have a question about the AHF03 and is the answer not in the manual?
Questions and answers