Table of Contents
Advertisement
WARNING
This product is extremely noisy in operation. You must
wear ear protection to reduce the risk of long term
hearing injury.
WARNING
Always wear safety goggles or safety glasses with
side shields when operating the product. Failure to do
so could result in objects being thrown into your eyes
resulting in possible serious injury.
■ To stop the hedge trimmer in an emergency. Press the
on/off switch to the "O" (off) position.
OPERATION
■ Always stop the engine, disconnect the spark plug cap
from the spark plug, allow it to cool, and make sure all
moving parts have come to a complete stop before:
● refuelling
● adjusting the working position or the rear handle
position
● leaving the product unattended
● cleaning the product
● changing the accessories
● clearing blockages
● checking for any damage after hitting an object
● checking for any damage if the product starts to
vibrate abnormally
● performing maintenance
■ Only start the engine when the hedge trimmer is in a
safe working position. The manufacturer recommends
that the product is placed on the ground where the
blades cannot contact anything before you start the
engine.
■ While operating the hedge trimmer, do not overreach
or stand on unstable support. Keep proper footing
and balance at all times. The manufacturer does not
recommend the use of steps or ladders. If higher
trimming is required, use an extended reach tool.
■ Do not operate the product with a damaged or
excessively-worn cutting device.
■ To reduce fire hazard, keep the engine and the
silencer free of debris, leaves, or excessive lubricant.
■ Always ensure that all handles and guards are fitted
when using the hedge trimmer. Never attempt to use
an incomplete hedge trimmer or one fitted with an
unauthorised modification.
■ Always use two hands to operate the hedge trimmer
which is fitted with two handles.
English (Original Instructions)
■ Familiarise yourself with your surroundings and be
MAINTENANCE AND STORAGE
■ Before cleaning, repairing, or inspecting, shut off the
■ Store the hedge trimmer where the fuel vapour will not
■ Whenever not in use, transporting or storing the hedge
ADDITIONAL WARNINGS
■ Do not operate the engine in a confined space
■ Do not use the hedge trimmer when you are tired, ill,
■ Ensure before each use that all controls and safety
■ Inspect the hedge trimmer before each use. Check for
■ Secure long hair so it is above shoulder level to
■ Do not operate in poor lighting. The operator requires
■ Check the work area before each use. Remove all
■ Check constantly for persons or animals behind or
■ Check all nuts, bolts, and screws at frequent intervals
3
on the alert for possible hazards which you may not
notice because of the noise from the hedge trimmer.
engine and make sure all moving parts have come to
a complete stop. Disconnect the spark plug wire and
keep the wire away from the plug to prevent accidental
starting. Allow the hedge trimmer to cool down before
making any inspections or adjustments.
reach an open flame or spark. Always allow the hedge
trimmer to cool down before storing.
trimmer, always fit the cutting device guard (scabbard).
where dangerous carbon monoxide fumes can
collect. Carbon monoxide is a colourless, odourless,
and an extremely dangerous gas which can cause
unconsciousness or death.
or under the influence of alcohol, drugs, or medication.
devices function correctly. Do not use the product if
the "off" switch does not stop the engine. The defective
switch must be replaced by an authorised service
centre.
fuel leaks or loose fasteners, etc. Do not operate if fuel
is leaking or handles and guards are not secure and
fully functional.
prevent entanglement in moving parts.
a clear view of the work area to identify potential
hazards.
foreign objects such as posts, wire, or string which
may damage or become entangled in moving parts or
cutting means.
inside any hedge or bush to be trimmed. Operating
similar tools nearby increases both the risk of hearing
injury and the potential for other persons to enter your
working area.
for proper tightness to ensure the product is in safe
Advertisement
Table of Contents
