Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for D&H SH05A Series
- Page 1 Doehler & Haass Sound module SH05A SH10A...
-
Page 2: Table Of Contents
Fahrzeug-/Funktionsdecoder Contents ab Firmware-Version 1.11 Introduction ............................3 Safety instructions ..........................4 Warranty ..............................4 Support and help ............................ 4 Soundmodul SH05A, SH10A ......................... 5 Functions ..............................8 Installing the sound module ......................... 9 Preparation ............................... 9 Check after installation ..........................9 Installation .............................. -
Page 3: Introduction
Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 1 Introduction The sound modules SH05A and SH10A are operated at the SUSI interface of a compatible car decoder. It can be used for all data formats supported by the vehicle decoder. Our SUSI sound modules can be electrically connected to all decoders with SUSI interface. -
Page 4: Safety Instructions
Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 2 Safety instructions This product is not suitable for children under 14 years. It might be swallowed by children under 3 years! An improper use involves a risk of injury due to sharp edges and points. 3 Warranty The functioning of every sound module is fully tested before delivery. -
Page 5: Soundmodul Sh05A, Sh10A
Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 5 Sound module SH05A / SH10A SH05A Ground ZDAT SUSI data ZCLK SUSI clock Supply voltage Speaker AUX1, AUX2 Unamplified additional function 1, 2 maximum load capacity each 20 mA +3,3 V Electronic supply voltage (not for the user!) - Page 6 Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 SH10A Ground ZDAT SUSI data ZCLK ZDAT SUSI clock ZCLK Supply voltage Speaker AUX1, AUX2 Unamplified additional function 1, 2 maximum load capacity each 20 mA +3,3 V Electronic supply voltage (not for the user!) AUX2 maximum load capacity 100 mA...
- Page 7 Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 Specifications SH05A SH10A Dimensions [mm] 14.3 x 9.3 x 2.9 20.0 x 12.0 x 1.9 Sampling rate 22 kHz 22 kHz Resolution 16 Bits 16 Bits Independent sound channels 128 Megabits 128 Megabits Memory size Storage duration...
-
Page 8: Functions
Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 5.1 Functions • Operation on all locomotive decoders with standard SUSI interface • Original vehicle specific steam, diesel and electric locomotive sound projects (no „standard sounds“) • Realistic steam driving noise with wheel synchronous and overlapping exhaust strokes, speed dependent pitch and independent boiling noise •... -
Page 9: Installing The Sound Module
Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 Installing the sound module 6.1 Preparation Before installation, the locomotive must be checked for perfect electrical and mechanical condition. Defects or soiling must be removed before installation. Basically the instructions of the locomotive manufacturer must be observed. Before installing the sound module, the locomotive must also be checked for proper function in digital mode. -
Page 10: Installation
Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 6.3 Installation There are three variants for connecting the sound module: If your locomotive decoder has a SUSI standard socket, you should use the sound module SH05A-2 or SH10A-2. It has the necessary connection cable for this socket. - Page 11 Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 SH10A Locomotive decoder with SUSI ZDAT ZCLK Function outputs: The function outputs AUX1, AUX2 are located on the bottom of the sound module and must be connected to the switching amplifiers with extra wires.
-
Page 12: System Format Susi
Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 System format SUSI 7.1 Functions Speed steps ........127 Front light/rear light ....... yes Additional functions ......28 Main track programming ....yes 7.2 Setting options The properties of the sound module for operation can be changed as often as desired by programming the “Configuration Variables”... -
Page 13: List Of Supported Cv Or Supported Parameters
Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 7.3 List of supported CVs and supported parameters CV/par Name and definition Range Standard Manufacturer identification (read only) 97 = Doehler & Haass (Decoder reset with “8“ or “101“) Decoder number (read only) SH05A = 50, SH10A = 100 Version number... - Page 14 Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 CV/par Name and definition Range Standard Function mapping sound flow 3 (as CV911) 0-29 Function mapping sound flow 4 0-29 (as CV911) Function mapping sound flow 5 0-29 (as CV911) Function mapping sound flow 6 0-29 (as CV911)
- Page 15 Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 CV/par Name and definition Range Standard Volume gear sound (as CV931) 0-255 Volume brake sound 0-255 (as CV931) Volume sound flow 3 0-255 (as CV931) Volume sound flow 4 0-255 (as CV931) Volume sound flow 5 0-255...
- Page 16 Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 CV/par Name and definition Range Standard Acceleration time 0-255 The value corresponds to the time in seconds from standstill to maximum speed Braking time 0-255 The value corresponds to the time in seconds from the maximum speed until stopped Chuffs at speed step 1 0-255...
- Page 17 Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 CV/par Name and definition Range Standard Write protection Flash-ROM 0, 1 Must be “0“ for sound operation (is operated during the loading process) Threshold value ZVS 0-14 The value corresponds to about the supply voltage in volt. At that voltage it will be changed to the energy saving mode (small values induces resetting the sound mo- dule and great values cause a “stuttering“...
- Page 18 Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 CV/par Name and definition Range Standard Modulation dynamic brake (as CV957) 0-255 Modulation dynamic drive 0-255 (as CV957) Modulation turbo sound proportional part 0-255 (as CV957) Modulation turbo sound integral part 0-255 (as CV957) Function mapping volume reduction...
-
Page 19: Operation
Fahrzeug-/Funktionsdecoder Sound module from firmware version 1.14 ab Firmware-Version 1.11 7.4 Operation Put the locomotive on the programming track and read out the manufacturer identification of the sound module (CV900/ par900). The default value should be 97. Program the desired locomotive address and start running the locomotive keeping these setup values. - Page 20 Notes...
- Page 21 Notes Dieses Produkt darf am Ende seiner Nutzungsdauer nicht über den normalen Hausmüll entsorgt werden. Bitte benutzen Sie die Entsorgungsstelle Ihrer Gemeinde. This product must not be disposed off with normal household waste at the end of its useful life. Please use the disposal point in your municipality.
- Page 22 Company Stamp Doehler & Haass Steuerungssysteme GmbH & Co. KG © 2020 Doehler & Haass c/o Frau Barbara Karpati Changes and errors reserved Ludwig-Braille-Straße 3 D-81379 Muenchen Tel. +49 (0)89 13 93 72 21 technik@doehler-haass.de www.doehler-haass.de Edition 09/2020...
Need help?
Do you have a question about the SH05A Series and is the answer not in the manual?
Questions and answers