Advertisement
Quick Links
Thank you for purchasing a
Naramata /Getaway Spa Shelter from
Outdoor Living Today. Please take
the time to identify all the parts
prior to assembly.
Safety Points and Other Considerations
Our products are built for use based on
proper installation and normal residential use,
on level ground. Please follow the
instruction manual when building your
shelter and retain the manual for
future maintenance purposes.
Some of the safety and usage measures you may wish to consider include:
-snow load ratings vary by geographical location. If heavy or wet snowfall
occurs, it is advisable to sweep the snow off the roof(s).
-if the product is elevated, any structural and building code requirements are
solely the customer's responsibility, and should be abided by.
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.
Customers agree to hold Outdoor Living Today and any Authorized Dealers free of any liability for
improper installation, maintenance and repair of any Outdoor Living Today products.
In the event of a missing or broken piece, simply call the Outdoor Living Today
Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your
purchase. It is our commitment to you to courier replacement parts, free of charge,
within 10 business days of this notification. Replacement parts will not be
provided free of charge after the 30 day grace period.
Toll Free 1-888-658-1658
9 ft Naramata Spa Shelter
Assembly Manual
Outdoor Living Today
www.outdoorlivingtoday.com
Feb 20th, 2015
sales@outdoorlivingtoday.com
Version #8
Advertisement
Related Manuals for OLT Naramata
Summary of Contents for OLT Naramata
- Page 1 9 ft Naramata Spa Shelter Assembly Manual Outdoor Living Today Version #8 Feb 20th, 2015 Thank you for purchasing a Naramata /Getaway Spa Shelter from Outdoor Living Today. Please take the time to identify all the parts prior to assembly.
-
Page 2: Parts Lists
Thank you for purchasing one of our Naramata Spa Shelters. Please take the time to identify all the parts prior to assembly. Parts Lists: Assembly Time: 1 Day (does not include site preparation) A. Wall Section Specifications: Outside Post to Post Dimensions 4 - 3 1/2”... -
Page 3: Tools Required
Level Safety Equipment Required (Not Provided) Safety Glasses Work Gloves Important - Assembly Manual shows illustrations for Naramata Model. Please follow general assembly instructions for Naramata. Refer to Parts List for any differences between Models. Framing of Baluster Section flush with Post... - Page 4 2 1/2” screws here. When Post and Baluster Section are position correctly, fasten together with 4 - 2 1/2” screws per side. Hint- screw both front sides (2 screws per side) flip assembly over and complete the other sides. You can find the Square Drive Bit for the screws in with the Hardware Kit...
- Page 5 When positioned correctly, attach Upper . Place the 3rd Upper Baluster Section Baluster Section to Post with 4 - 2 1/2” screws per side as described in Step 3. At this stage, the into place so both post and framing are post/baluster assemblies should be able to support flush with each other as per Step 2.
- Page 6 2 1/2” screw 2 1/2” screw Next, attach Top Plates. The Top Plates will tie your post and balusters together. There are 2 Top Plates per side (left and right both with a 45 degree cut on the end. Locate and position on top of post/baluster assembly.
- Page 7 Both Top Plates should 3rd Top be flush and sitting on Plate. the post equally. Position 3rd Top Plate down and attach to post/baluster assemblies as described earlier. Complete remaining Top Plate attachments working in a clockwise direction. When completed, you are ready to start Corner Bracket Attachments.
- Page 8 centered on bottom of baluster section Locate all 8 Black Powder Coated Aluminum Corner Brackets and Black 2” Screws. Position Corner Bracket on post and underside of baluster section centering in the middle of each. Note: Prior to attaching Attach with Black screws into the Brackets, use a level to Brackets pre-drilled holes.
- Page 9 Corner Rafter (flush to bottom of Skybox) From the outside, toenail a 2 1/2” screw from rafter top into Skybox. Drilling a pilot hole will prevent end splitting. Toenail 2 1/2” screw While your helper holds up the Skybox, attach the first Corner Rafter to the Skybox from the inside.
- Page 10 Skybox Midpoint Center Rafter Toenail the Center Rafter to Skybox with a 2 1/2” screw. Rafter will be flush at the bottom. Complete all other Center Rafter/Skybox attachments. 2 - 2 1/2” Toenail screws Important- Be careful with 2 1/2” not to bend or scratch screw Center Rafter...
- Page 11 Center Rafter Simpson Strong Tie When inside the Naramata, the Center Rafter Simpson Strong Tie should sit flush against Top Plate and be centered between posts. Check all Center Rafter locations and when positioned correctly, screw the Strong Ties into Top Plate / Baluster with 2 - 1 1/4”...
- Page 12 Position Corner Rafters so they sit equally on corners of Top Screw Corner Plates. Screw rafters down into Rafter down with plates with 1 - 4” screw. 4” screw. Pilot hole first to make it easier to screw. Corner Rafter Mid Rafters Screw Mid and Center Rafters down into Top Plates with a 4”...
- Page 13 You will need a step ladder to complete the roof section. Be Careful when working on the ladder! Lift and position the first Right Sided Roof Section into place on the rafters. (There are 4 Right and Left Sided Roof Panels). 1/2 way Place Right Sided Panel so it sits on rafter...
- Page 14 You may want to reposition roofs slightly after all the panels are up to get the best fit for your Naramata. Continue adding Roof Panels. Remember, there will be small seams between roof panels that will be covered later.
- Page 15 Screw first filler shingle down to rafters using 1 - 2 1/2” screw per panel (2 in total). Make sure to screw into both rafter. Secure Roof Panels to Center Rafter using 2 - 2 1/2” screw. Make sure to screw Slide first 18”...
- Page 16 Place 3rd Ridge Cap 7 1/2” up from butt of 2nd Cap and nail with 2 Shingle Nails approximately 9” from the butt. Make sure to alternate Ridge Cap offsets as you complete each row. Position and attach 4th Ridge Caps as previously described. Complete remaining Long Ridge Caps.
- Page 17 Near end, Hand tighten Screws to prevent cracking. Use 1 1/2” black screws Drill 1/8” Pilot Hole with neoprene in Skylight Trim washers prior to attaching. attached Position Skylight Trim to cover Flashing. Prior to lifting your Skylight into place, carefully Drill 1/8”...
- Page 18 We hope your experience assembling the Naramata Spa Shelter has been both positive and rewarding. We value your feedback and would like to hear back from you on how well we are doing in the following areas: 1.