Safety Procedures - probst VTK-V Operating Instructions Manual

Maintenance and care
6.4

Safety procedures


It is the contractor's responsibility to ensure that the device is checked by an expert in periods of
max. 1 year and all recognized errors are removed ( see BGR 500).

The corresponding legal regulations and the regulations of the declaration of conformity have to be
observed!

We recommend that after checking the device, the badge "Safety checked" is put on the device.
(Order-No.: 2904.0056+inspection sticker with date).
●
You can receive these badges from us.
The check by an expert must be proved!
Device Year
5110.0015
Date
V2
Expert
19 / 20
Company
GB