Caring For Your Monitor; Wall Mounting (Optional) - Lenovo ThinkVision M14t User Manual

Caring for your monitor

Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
• Apply water or liquid directly to your monitor.
• Use solvents or abrasives.
• Use flammable cleaning materials to clean your monitor or any other electrical equipment.
• Touch the screen area of your monitor with sharp or abrasive items. This type of contact
may cause permanent damage to your screen.
• Use any cleaner which contains an anti-static solution or similar additives. This may harm
the coating of the screen area.
Do:
• Lightly dampen a soft cloth with water and use this to gently wipe the covers and the
screen.
• Remove grease or finger marks with a damp cloth and a little mild detergent.

Wall Mounting (Optional)

Refer to the instructions that come with the VESA compatible base mounting kit.
1. Place the monitor face down on a non-abrasive surface on stable flat table.
2. Use clips to lock the monitor.
3. Attach the mounting bracket from the wall mounting kit to the monitor.
4. Mount the monitor on the wall by following the instructions that come with the base
Note:
• For use only with UL and GS Listed Wall Mount Bracket with minimum weight/load
bearing capacity of 6.00 kg.
• When you use a flexible arm, do not tilt the monitor downward by more than 5 degrees.
2-19 M14t Flat Panel Monitor User's Guide
mounting kit.
2 screws(M4)