Lenovo ThinkVision M14t User Manual page 40

Installing the monitor driver in Windows 10
To use the Plug and Play feature in Microsoft Windows 10, do the following:
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot into
4. From the Lenovo website https://pcsupport.lenovo.com/solutions/m14t, find the
5. On the Desktop, move mouse to bottom-left corner of screen, right-click to choose
6. Click the Change the display settings tab.
7. Click the Advanced Settings button.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select "Let me pick from a list of device drivers on my computer".
13. Click the Have Disk button. By clicking the Browse button, browse and point to the
14. Select the "M14t.inf" file and click the Open button. Click the OK button.
15. In the new window, select Lenovo M14t and click Next.
16. After the installation is complete, delete all downloaded files and close all windows.
17. Restart the system. The system will automatically select the maximum refresh rate and
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x
480 at a refresh rate of 60 Hz.
3-6 M14t Flat Panel Monitor User's Guide
Windows 10 operating system.
corresponding monitor driver and download it to a PC to which this monitor is
connected (such as a desktop).
Control Panel, then double click the icon of Hardware and Sound, and then click
Display.
following path:
X:\Monitor Drivers\Windows 10
(where X indicates "the folder in which the downloaded
driver is located" (such as a desktop)
corresponding Color Matching Profiles.