Selecting A Supported Display Mode - Lenovo ThinkVision M14t User Manual

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat
Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-attach
the CRT monitor temporarily until you have re-configured the system; preferably to
1920x1080 at 60Hz, which is the Native Resolution Display mode.
Response time: 6ms with overdrive @60Hz
Table 2-3. Factory set display modes
Addressability
PAL
640x350
640x480
720x400
800x600
1024x768
1152x864
1280x768
1280x800
1280x1024
1366x768
1440x900
1600x1200
1680x1050
1920x1080
1080x1920
Note: The video signal source connected to M14t needs to support USB-C DP Alt-mode
video output.
Refresh rate
50Hz
70Hz
60Hz, 66Hz,72Hz,75Hz
70Hz
60Hz,72Hz,75Hz
60Hz,70Hz,75Hz
75Hz
60Hz
60Hz
60Hz,72Hz,75Hz
60Hz
60Hz,75Hz
60Hz,70Hz
60Hz
60Hz
60Hz
Chapter 2.Adjusting and using your monitor 2-16