Leuze electronic DDLS 500 Series Manual page 17

Alignment laser (optional) – laser class 1
ATTENTION, LASER RADIATION – LASER CLASS 1
The alignment laser satisfies the requirements of IEC 60825-1:2007
(EN 60825-1:2007) safety regulations for a product in laser class 1 as well as the
U.S. 21 CFR 1040.10 and 1040.11 regulations with deviations corresponding to
"Laser Notice No. 50" from June 24th, 2007.
 Observe the applicable statutory and local laser protection regulations.
 The device must not be tampered with and must not be changed in any way.
There are no user-serviceable parts inside the device.
Repairs must only be performed by Leuze electronic GmbH + Co. KG.
Devices with integrated alignment laser can be identified by part
number code L in the part designation, e.g., DDLS 5xx XXX.3 L.
Laser class 1M also applies for devices with integrated align-
ment laser.
Part number code
Please refer to the part number code for your device model.
DDLS 5xxi III.f L H W
DDLS Operating principle: optical transceiver for digital data transmission
5 Series: DDLS 500
xx Interface:
08: 100 Mbit/s TCP/IP or UDP transmission
08 : 100 Mbit/s TCP/IP or UDP transmission
48 : 100 Mbit/s TCP/IP or UDP transmission
lll Range for data transmission in m
f Frequency of the transmitter:
0: Frequency F0
3: Frequency F3
4: Frequency F4
L Integrated alignment laser for mounting support (optional)
H Integrated device heating (optional)
W Transmission optics with larger opening angle (on request)
1) See "Technical Data", "Data Transmission" on Page 20
A list with all available device types can be found on the
Leuze electronic website at www.leuze.com.
Profinet RT Class B
1)
1)
/ integrated web server
1)
/ integrated web server /
EN
17