Download
Share
Print this page
OHAUS Valor 3000 Quick Start Manual
  1. Manuals
  2. Brands
  3. OHAUS Manuals
  4. Scales
  5. Valor 3000
  6. Quick start manual

OHAUS Valor 3000 Quick Start Manual

Hide thumbs Also See for Valor 3000:
1
2
3
4

Advertisement

Quick Links

Download this manual
Quick Start Guide
PREPARATION FOR USE
Before using the Valor 3000,
Unlock the Transport Lock:
1. Open the battery cover.
2. Move the transport lock switch to
"Unlock" position.
3. Install 4 C (LR14) batteries, if desired.
Reinstall the battery cover.
4. To install power jack, remove seal
behind adjustable foot.
SAFETY PRECAUTIONS
For safe and dependable operation of this product, please comply with the following
safety precautions:
•
Verify that the input voltage printed on the power Adapter and the plug type matches
the local power supply.
•
Make sure that the power cord does not pose an obstacle or tripping hazard.
•
Disconnect the product from the power supply when cleaning.
•
Do not operate this product in hazardous or unstable environments.
•
Do not drop loads on the pan.
•
Use only approved accessories and peripherals, as available.
•
Operate the product only under ambient conditions specified in the Instruction Manual.
•
Service should be performed by authorized personnel only.
Ohaus Corporation www.ohaus.com
Input Jack
Seal Storage
Receptacle
SELECTING THE LOCATION
Place on a firm, steady surface.
Avoid locations with excessive air current,
vibrations, heat sources, or rapid temperature
changes.
Level the scale: Adjust leveling feet so bubble
is centered.
i
Valor
™
Valor
3000
Battery
Cover
Transport
Lock
Seal
™
3000 Quick Start Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the Valor 3000 and is the answer not in the manual?

Questions and answers

Related Manuals for OHAUS Valor 3000

Summary of Contents for OHAUS Valor 3000

  • Page 1 ™ Quick Start Guide Valor 3000 Battery PREPARATION FOR USE Cover Before using the Valor 3000, Transport Lock Unlock the Transport Lock: 1. Open the battery cover. 2. Move the transport lock switch to “Unlock” position. 3. Install 4 C (LR14) batteries, if desired.
  • Page 2 “No” (toggles through available settings) Short Press Stores 100% reference in % mode ENTER Cal Stores reference sample in SG mode Long Press Initiates span calibration process Short Press (Menu) “Yes” (selects/accepts displayed setting) ™ Valor 3000 Quick Start Guide Ohaus Corporation www.ohaus.com...
  • Page 3 3. Fill the container with sample material. The display shows the volume of the sample. Verify the scale: place a known mass on it and check if the reading is accurate. If not, calibrate, using the Calibration Guide. ™ Ohaus Corporation www.ohaus.com Valor 3000 Quick Start Guide...
  • Page 4 *When scale is set for Legal For Trade (on XW and NTEP models), the following menu settings cannot be accessed: Calibration, Unit, Stability, AST, Filter, Power On Unit, and Global Reset. *80252977* P/N 80252977 ™ Valor 3000 Quick Start Guide Ohaus Corporation www.ohaus.com...