EINHELL TC-VC 1815 S Original Operating Instructions page 23

GB
or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use
in commercial, trade or industrial applications. Our warranty will
be voided if the equipment is used in commercial, trade or in-
dustrial businesses or for equivalent purposes.
4. Technical data
Mains voltage: ....................................................... 220-240 V ~ 50 Hz
Power input: .......................................................................... 1.250 W
Container volume: .........................................................................15 l
Weight: ......................................................................................3,7 kg
Protection class: ......................................................................... II /
5. Before starting the equipment
5.1 Appliance assembly
Fitting the appliance head (Fig. 4a/4b)
The appliance head (3) is fastened to the container (7) by the
locking hook (6). To remove the appliance head (3), open the
locking hook (6) and remove the appliance head (3). When fi t-
ting the appliance head (3), make sure that the locking hook (6)
locks into place correctly.
Fitting the castors (Fig. 5)
Fit the castors (13) in accordance with Fig. 5.
Fitting the handle (Fig. 6)
Fit the handle (1) by pressing it into the opening provided for it
in the equipment head (3).
Rewinding the cable (Fig. 7):
- 23 -