Distortion Pedal
Main Features
3 Working Modes: Original/Extra/Ultra
Full metal shell
Very small and exquisite
True bypass
DC 9V Adapter power supply
Original: Provide a strong and hard edge distortion sound with low
noise level.
Extra:
For high gain, and more tube like distortion.
Ultra:
For a fatter drive tone, and a wider distortion range.
3
Ultra
Extra
Original
6
7
8
TONE
9
4
DIST
5
6. Mode Switch:
Switch between
Original
mode, Extra mode and
7. LEVEL Knob:
Adjust the volume of the distortion sound.
8. TONE Knob:
Adjust the tone color of the distortion sound.
9. DIST Knob:
Adjust the gain of the distortion sound.
Effects Modes: 3 (Original/Extra/Ultra)
Input: 1/4" monaural jack (impedance: 470k
Output: 1/4" monaural jack (impedance: 10k Ohms)
Power Requirements: AC adapter 9V DC (center minus plug)
Current Draw: 6 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight: 160g
Accessories: Owner's Manual
*
Disclaimer: Any specification's update won't be amended in this manual.
1. TRUE BYPASS
Footswitch:
Push down the footswitch
to switch between effects
and bypass status.
2. ON/OFF LED:
Instructs effects or bypass
status of Ultra Drive, when the
LED is lit up, the effects is on.
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter(plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4" mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4" mono audio jack, outputs
the signal.
Ultra
mode.
Ohms
)