Page 1
Avant Garde Easy Fitting Instructions Helpful Advice Before Fitting 1. These instructions are provided in an easy to follow style. Simply follow the instructions in sequence to fit this product. 2. Please retain all packaging until you have checked and counted all the parts and the contents of the fixing pack against the parts list.
Avant Garde Tool List: • 10mm open ended spanner • Measuring tape • Pencil • Cement (If fitting a Gas Fire) • River Sand (If fitting Gas Fire) • Silicon adhesive for securing to the wall • 4 x suitable plastic wall plugs •...
Front view Diagram A (F) Ash Pan and Fret (F) Grate Rear view (A) Mantle Top Damper - Not to be fitted on gas fires (C) Surround (B) Chair Brick Bolts Diagram B...
Page 4
Avant Garde Assembly instructions for fitting an electric or gas fire Positioning hearth Diagram A Carefully unpack the hearth part (d) and position, Ensure hearth is centralised to your fireplace opening. If installing an electric fire, ensure you have sufficient room for the power cable of your...
Page 5
Fitting the surround With the hearth central to the fireplace opening, place surround onto the hearth (use cardboard to protect the hearth) mark off position of 4 fixing holes on the wall. Remove surround from the hearth, drill and fit wall plugs If being used for an electric fire or no fire.
Page 6
Avant Garde Note: A CORGI registered gas fitter must be used to fit your gas fire. Please Note If you need any further advice or any spare parts for this item, please contact our customer service help line on 0870 224 2811 or e-mail helpline@adamsurrounds.co.uk for assistance.