Advertisement
Table of Contents
Knightsbridge
Easy Fitting Instructions
Helpful Advice Before Fitting
• These instructions are provided in an easy to follow style. Simply follow the instructions in sequence
to fit this product.
• Please retain all packaging until you have checked all the parts the parts list.
• To clean the surround we advise that you use a damp cloth and buff of with a soft, dry duster.
• Please note: if fitting a gas fire a CORGI registered gas fitter must be used to install your gas fire
• These instructions are guide only, there are various other methods of fitting this fireplace.
In the unlikely event that this product has missing or damaged parts, please call our help line on
0870 224 2811 or e-mail helpline@adamsurrounds.co.uk for assistance or to obtain spare parts.
Advertisement
Table of Contents
Related Manuals for Adam Knightsbridge
Summary of Contents for Adam Knightsbridge
- Page 1 Knightsbridge Easy Fitting Instructions Helpful Advice Before Fitting • These instructions are provided in an easy to follow style. Simply follow the instructions in sequence to fit this product. • Please retain all packaging until you have checked all the parts the parts list.
-
Page 2: Parts List
Knightsbridge Tool List: • Pencil • Measuring tape • Silicone adhesive • Cement (If fitting a Gas Fire) • Brackets for securing to the wall Parts List: Please ensure you have all the correct parts before beginning to fit this fire suite... - Page 3 Fitting the hearth and positioning the legs Diagram A Carefully unpack the hearth part A and position, ensure the hearth is centralised to your fireplace opening. if installing an electric fire, ensure you have sufficient room for the power cable of your electric fire to run to the socket If having a gas fire installed ,prepare a bedding mixture, which can be sand and cement with an accelerator added to speed up hardening, or a special mixture available ready mixed.
- Page 4 Knightsbridge Positioning the cast back panel The back panel must have a air tight seal on to the wall Slide the cast iron back panel and attached chair brick into the builders opening and cement into position. Positioning the legs, fascia and mantel...
- Page 5 Attaching the grate, (optional for gas or solid fuel), fret and ash pan cover If using solid fuel option secure grate in position by simply slotting into the hole on the back panel, see diagram B. Attach the fret by securing in the slots on the side of the cast back. Complete by sliding the ash pan cover into place Diagram C Slots for securing...
- Page 6 Knightsbridge Installation Instructions for fitting a gas fire. Note: It is a legal requirement that any installation of gas work is carried out by a CORGI Registered installer This information provided within this instruction sheet is only a suggestion which can assist the installer to fit the fireplace correctly. There are other...
Need help?
Do you have a question about the Knightsbridge and is the answer not in the manual?
Questions and answers