Direction Of The Switch's Installation - Launch TWC-581 Installation And Parts Manual

LAUNCH
Directional Switch's Installation (Service Only)
1 C onnecting the wire harness to the switch (fig31)
¤
Observe the identification tags on wires and match then to the poles on the switch such as U2 to U2
sequence, but make sure the wires and poles match
2 ¤ I nstallation of the switch
The switch's position to the bracket is shown as in fig32, you may have to rotate the switch slightly in the slots with
the attachment screw slightly loose to position the switch so that clockwise and counter clock potation of the motor
occurs correctly. Once in the correct position tighten the two screws.
¥
Fig.31
Adjustment slots for switch location
The switch parameter
Fig 32
14
Tire Changer TWC-581
¥ T hey is no