ABB Relion 670 Series Product Manual page 61

ABB
Phasor measurement unit RES670
Pre-configured
Product version: 1.2
GPS antenna and mounting details
GPS antenna, including mounting kits
Cable for antenna, 20 m
Cable for antenna, 40 m
Test switch
The test system COMBITEST intended for use
with the IED 670 products is described in 1MRK
512 001-BEN and 1MRK 001024-CA. Please
refer to the website:
www.abb.com/substationautomation
information.
1 TRM Single busbar/2 TRMs Double busbar with
6 bays with internal neutral on currents circuits
(ordering number RK926 315–AN).
1 TRM Single busbar/2 TRMs Double busbar with
6 bays with external neutral on currents circuits
(ordering number RK926 315–DB).
1 TRM/2 TRM with internal neutral on currents
circuits (ordering number RK926 315–AM).
Protection cover
Protective cover for rear side of terminal, 6U, 1/1 x 19"
Combiflex
Key switch for settings
Key switch for lock-out of settings via LCD-HMI
Note: To connect the key switch, leads with 10 A Combiflex socket on one end must be used.
Configuration and monitoring tools
Front connection cable between LCD-HMI and PC
LED Label special paper A4, 1 pc
LED Label special paper Letter, 1 pc
Quantity:
Quantity:
Quantity:
1 TRM/2 TRM with external neutral on currents
circuits (ordering number RK926 315–DC).
Test switches type RTXP 24 is ordered
separately. Please refer to Section
documents"
for detailed
documents.
RHGS 6 Case or RHGS 12 Case with mounted
RTXP 24 and the on/off switch for dc-supply are
ordered separately. Please refer to Section
"Related documents"
corresponding documents.
Quantity:
1MRK 511 266-BEN -
1MRK 001 640-AA
1MRK 001 665-AA
1MRK 001 665-BA
"Related
for reference to corresponding
for reference to
1MRK 002 420-AA
Quantity: 1MRK 000 611-A
Quantity: 1MRK 001 665-CA
Quantity: 1MRK 002 038-CA
Quantity: 1MRK 002 038-DA
61