Utilita Smart Display User Manual page 36

Smart Display / User Guide
Why has the screen on my Smart Display turned
off/gone blank?
Your Smart Display may be off for a number of reasons. If you have selected
the Backlight to be off or the Backlight timer setting to be on, then the
screen will be blank when you are not using it (check in
Touch any button and the screen should come back on.
If you're using batteries, it may be that they have run flat. Either connect
your Smart Display using the power adapter or replace the batteries.
The Smart Display will run for approximately 4 hours with batteries so that
you can carry it around the home to learn how different appliances work.
It is not intended for prolonged use.
Powering your Smart Display
Your Smart Display can be powered using the supplied power supply
or with 3 x AAA (R03, LR03) non-rechargeable batteries.
It is not recommended to use batteries for a prolonged period.
To replace batteries, slide the stand downwards and then pull it away.
Insert the batteries, as marked on the inside case. Reattach the stand
and the Smart Display will show the battery symbol at the top of the screen.
Do not use rechargeable batteries in this Smart Display.
Why is my Smart Display making a noise?
The Smart Display has a built-in speaker which is used for alerts, messages
and can also provide feedback. You can adjust the volume, and turn off/on
the different sounds via the settings page
How much energy does my Smart Display use?
The input power for the Smart Display is 0.5W. In terms of cost, this is
typically equivalent to less than £1 a year.
Why is the System Status screen showing
a Wi-Fi error?
When the System Status screen shows the Wi-Fi symbol in red or amber,
this means one of the following:
The Smart Display is out of range of the Wi-Fi network or it is
not available – try moving closer to the access point or router
The security details for the Wi-Fi network have changed since
they were set up
The Smart Display's details have been actively blocked by
the Wi-Fi network
The Smart Display is running on batteries – the Wi-Fi module
does not function when running on batteries
Settings > Display).
Sound & Alerts)
(Settings >
FAQs
36