Online Setup; Introduction; Connect To Wi-Fi Network - Utilita Smart Display User Manual

Smart Display / User Guide

Online setup

Introduction

The Smart Display has built-in Wi-Fi, which can be enabled to connect
to the internet.

Connect to Wi-Fi network

Your Smart Display will need to be connected to a local Wi-Fi network
to enable cloud services.
Access Wi-Fi settings screen
Press the menu (i) button on the Home screen
Scroll down to
Scroll down to
Enable Wi-Fi (by default it is disabled)
Touch Set up network
Connection methods
There are three different ways to connect to a local Wi-Fi access point:
List networks - Scan for the list of networks that can be joined.
Manual - manually enter the Wi-Fi name (SSID) and password.
Advanced - use your smart phone or laptop - and connect to
the Smart Display to enter your Wi-Fi's username and password.
Follow the on-screen instructions on connecting using one
of the methods above.
The Smart Display only supports 2.4GHz Wi-Fi, so please ensure
Settings
Wi-Fi network
this is not disabled on your Wi-Fi router.
Online setup
34