Single Fuel Mode (Credit Customers Only) - Utilita Smart Display User Manual

Smart Display / User Guide Home Screen
If a minimum top-up amount has been set by the meter, then a toggle
function is available to show either 'minimum top-up' or 'Emergency Credit
remaining'. To toggle between either value touch anywhere within the cost
area (for the example above £2.66 or £2.34).
Pressing within the outer ring will show the top-up screen, allowing a top-up
code to be entered. If the electricity supply is ready to be enabled, then
pressing here will show the enable supply pop-up box (see Pre-pay section
for further details).
The Smart Display is capable of notifying you when the prepayment balance
is low. Change the alert setting ( Settings > Pre-pay > Low credit alert ) to be
notified. Similarly, when Emergency Credit becomes available, a pop-up will
be shown to alert you.

Single fuel mode (credit customers only)

When only one fuel is supplied and the meter is in credit mode (when
the meter is in credit mode, a monthly or quarterly bill will be issued), the
home screen will show consumption now and the energy used for today.
The example below is for electricity; gas will adopt a similar approach.
Touching the electricity dial or percentage used will show the electricity
usage history. Similarly, for single fuel gas, touching the gas flame or
percentage will show the Gas usage history.
Touching the cost or kW (kWh), will switch between cost view
and consumption view.
14