Introduction; Unpacking - K-array K-CTRL User Manual

2.UNPACKING

Each K-array device is built to the highest
standard and thoroughly inspected before
leaving the factory.
Carefully inspect the shipping carton,
then examine and test your new product.
If you fi nd any damage immediately notify
the shipping company. Only the consignee
may institute a claim for damages incurred
PRELIMINARY
K-CTRL
RGB LED DMX-controlled
3-Channel power supply

1.INTRODUCTION

The K-CTRL DMX-controlled 3-Channel
power supply works as the power supply
and DMX function controller for the LED
component of the K-Array KTL22 series of
combined Speaker/Lighting fi xtures.
Colourmix, intensity and program operation
mode can all be preset. The K-CTRL can
also operate using an internal microphone
for sound-to-light operation. Any settings
are maintained when power is off and will
return to the last setting when powered on
again. A number of KTL22 series fi xtures
can be controlled from a single K-CTRL.
To take full advantage of all the functions
of the K-CTRL and for your own safety and
the safety of your environment, please
read these operating instructions carefully
before you start using the unit.
in shipping. It is suggested that you
retain the original packaging so that the
system can be repacked at a future date
if necessary.
Please note that K-array and its distributors
cannot accept any responsibility for
damage to any returned product through
the use of non-approved packaging.
5