Table of Contents
Advertisement
120 -
4.4.2 Processing types
The types of processing can only be set to „on". The previous setting is set to „off"" by
selecting a different startup setting to „on".
4.4.2.1 Threading blind hole
Option:
You can set chip breaker settings and reversions.
4.4.2.2 Threading through hole
Option:
4.4.2.3 Thread recutting
Option:
You can adjust the torque reduction during the lead-in chamfer.
(10 –
4.4.2.4 Thread forming
Option:
4.4.2.5 Insert threaded bushing
Option:
You can select the shutdown parameters:
Option:
4.4.2.6 Insert bolt
Option:
You can select the shutdown parameters:
Option:
4.4.2.7 Thread gauging
Option:
You can set a torque elevation for the return stroke.
(10 –
34
300 / 400 / 900
on
4.4.2.1.1 Chip breaking
Option:
off / on
You can set the following values after power on:
-
first chip breaking
-
interval
-
chip clearance depth
4.4.2.1.2 Reversions
Option:
on / off
Option:
3 – 15
(maximum number of reversing)
on
on
90%).
on
on
torque stop parameter / depth stop parameter
on
torque stop parameter / depth stop parameter
on
4000%)
(first chip breaking depth in mm)
(interval depth in mm)
(chip break angle or depth to the
workpiece zero point, which should be
turned back by chip breaking.)
user manual
Advertisement
Table of Contents
