Table of Contents
Advertisement
120 -
4
Operation
Functions of buttons
4.1
2.1
2.2
2.3
(2.1)
The full colour 4.3 "TFT display shows operating parameters, processing results, error
and fault messages.
(2.2)
The emergency stop button switches off the motor and feed after actuation.
You can unlock the emergency stop button by pulling it.
The machine can be restarted after a waiting time of 2 - 3 minutes
Attention: Time between deactivating and activating the mains power supply
If, after running the drive by means of engine power (speed and torque at the
motor), the power supply has been switched off, the inrush current limitation
must cool down for 2 - 3 minutes. If this is not given heed to, the component
causing the inrush current limitation can be destroyed.
Attention
Note: If the emergency stop has been engaged during process, the tool can
be removed from part with the function safe reverse movement, executed by
pressing the start button after emergency stop has been disengaged and the
machine has been switched on again.
Note
(2.3) The motor switch is used to lock the spindle (eg: tool change).
Attention: Time between engaging and disengaging the motor switch should
not be less than 2 - 3 minutes. Otherwise the drive might become damaged.
(Tauro120 und Taurox 300 / 400 / 900)
Attention
28
300 / 400 / 900
2.7
2.6
2.5
2.4
(2.1)
Display
(2.2)
Emergency stop
(2.3)
Motor switch
(2.4)
Rotary knob with button
(2.5)
Rotary knob LED
(2.6)
Menu button
(2.7)
Menu button LED
user manual
Advertisement
Table of Contents
